| Customization: | Available |
|---|---|
| After-sales Service: | Long Life Aftersales Service |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 10/Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
FRP( Short of Fiber Reinforced Plstic) is one kind of composite material made through the composite process with polymer resin as the matrix such as E-glass/basalt fiber or carbon fiber as the reinforcement. It has the advantage of high tensile strength, low weight, corrosion resistance and non-conductive than the steel rebars.
Glassfiber reinforced polymer rebar (GFRP) is made from high technical performance resin (UP/VE/EP/PU)and glass fiber by pultrusion process.
Compared with steel rebars, GFRP Fiberglass Rebar/Basalt Fiber Rebar have many advantages:
1. High tensile strength.
-Its strength is approximately double of steel bar, And when you bend it, it will bounces back quickly, that make the building more stable.
2. High corrosion resistance.
-Fiberglass rebar is waterproof and resistant to seawater corrosion, it never rust even stay in the concrete or building wall for many many years.
3. Low density and light weight.
-The meter weight is only 1/4 of steel bar, the worker can carry it easily, And also the transportation cost can be reduced much more.
4. Electrical insulation, without static electricity
-It has no electrical conductivity, and no sparks will be produced when being cut, it's particularly suitable for high risk gas zones; like Coal mines, oil fields.
5. Easy Cutting.
-Easy to cut, very suitable for construction of tunnels and subway projects, It avoids damages to cutter heads and does not delay excavation.
Applications:
Сonstruction,
subway tunnel,
coal mine tunnel,
rock surface anchoring,
sea wall,
parking structures,
slope support,
transportation industry and dam etc.
construction of the subway station always should be a deep foundation pit project, which needs to be constructed with a retaining wall. Then construction technology of underground continuous wall and retaining wall were widely used for temporary protection.
In the shield launching shaft and receiving shaft area of station, because the performance of glass fiber reinforcement is roughly the same as the shrinkage coefficient of concrete, and it can bond with concrete well, it has lower shear strength and higher tensile strength, and can be broken by shield machine grinding and cutter head. Therefore, it is possible to replace ordinary steel bars with glass fiber reinforcement in the shielding structure of the subway shield shaft, reducing manual cutting and removing the supporting piles within the shield range, greatly reducing the cutting loss of the shield cutter head, and improving the shielding efficiency. The efficiency of the tunnel and exit not only effectively improves the safety of subway construction, but also achieves a significant increase in economic benefits. In addition, the glass fiber reinforcement machine is simple and convenient, the construction process is simplified, and the operation is extremely convenient.
Suitable Size of Straight Bar:
| No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
| Diameter | Φ10 | Φ12 | Φ14 | Φ16 | Φ18 | Φ20 | Φ22 | Φ25 | Φ28 | Φ32 | Φ34 |
| Weight (g/m) |
160 | 230 | 300 | 400 | 490 | 590 | 710 | 930 | 1160 | 1520 | 1700 |
| E-Modulus (GPa) | 40-60 GPa | |||||||||||||||
| Fiber Content (%) | 70%-80% | |||||||||||||||
| Shear Strength (MPa) |
≥150 |
|||||||||||||||
| Approx. Density (g/cm³) | 1.8-2.1 | |||||||||||||||
| Dia. (mm) | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 | 34 | 36 |
| Approx. Weight (g/m) | 25 |
55 |
100 |
160 |
230 |
300 |
385 |
490 |
590 |
710 |
930 |
1160 |
1280 |
1520 |
1700 |
186 0 |
| CSA (mm²) |
12.5 | 26.8 | 47.7 | 78.5 | 113 | 154 | 185 | 234 | 289 | 342 | 442 | 554 | 636 | 804 | 908 | 101 7 |
| Tensile Strength (Mpa) |
1150 |
1100 |
1050 |
980 |
870 |
764 |
752 |
744 |
716 |
695 |
675 |
658 |
637 |
626 |
615 |
603 |
| Ultimate Tension (KN) |
31 |
53 |
72 |
99 |
117 |
149 |
189 |
225 |
270 |
342 |
405 |
450 |
504 |
550 |
592 |
|
Hengshui Gains Trade Co., Ltd. Locates in Jizhou City, Hebei Province-biggest production base of FRP products and radiators of China, combines advantages of local different industries, Hengshui Gains Trade Co., Ltd. consists of several large-scale manufacturers, depends on customers' different requirements, we recommend and choose suitable manufacturer to satisfy and fullfill, we can provide design, supply, shipping, installation, commissioning etc one-station service or technical consultation service. From our company to Tianjin seaport is 300km, to nearest airport is 180km, nearest high-speed train station is 90km.
Our core business and services are:
Cooperation Win-win
Our company established by several manufacturing enterprises jointly, we can provide that design, manufacture, installation supervision etc one-station services.
Q: why choose Gains Trade?
A: 15+ years experience in FRP industries, have rich experience that provide different FRP products to Fluor, Technip, Dossan, Arkema, Toyo, Veolia, Wison, Dupont, BASF etc.
Q: Can you choose correct raw material for our FRP product?
A: absolutely, pls provide medium & concentration, temperature, pressure etc technical parameters, PP/FRP, PVC/FRP, PVDF/FRP etc pipe/tank/tower also are in our supply scope.
Q: what's your delivery time?
A: we have several manufacturing plants, each plant has design department, production facilities, we can finish your FRP products in shortest time.
Q: which port is nearest to your plant?
from our plant to Tianjin seaport is 300km, to Shijiazhuang/Jinan airport is 150km, to Hengshui high-speed train station is 30km.
){kind=link}